UITS Faculty Profile of - Sheik Md. kazi Nazrul Islam

Sheik Md. kazi Nazrul Islam

Assistant Professor (On Study Leave, Australia)
Office:2nd Floor (Main Campus), UITS, Dhaka-1212
nazrul.islam@uits.edu.bd


   
Education
  • Doctor of Philosophy (PhD) in Institute for Superconducting & Electronic Materials (On going)

        Australian Institute of Innovative Materials, University of Wollongong, Australia; web: www.uow.edu.au

  • Master of Philosophy (M.Phil) in Materials Science

Bangladesh University of Engineering and Technology (BUET), Bangladesh; web: www.buet.ac.bd          

  • Master of Science (M.S) in Applied Physics, Electronics & Communication Engineering

University of Chittagong, Chittagong, Bangladesh; web: www.cu.ac.bd                                                   

  • Bachelor of Science in Applied Physics, Electronics & Communication Engineering

University of Chittagong, Chittagong, Bangladesh; web: www.cu.ac.bd                               

Publication

8. Sheik Md. Kazi Nazrul Islam , ASW Kurny and Fahmida Gulshan, "Photocatalytic Efficiency of Mill Scale for the Degradation of Textile Dye by Photo Fenton and Photo-Ferrioxalate System under UV and Sunlight", Environment and Ecology Research, Vol. 1 No. 3, pp. 129 - 134, November 2013, USA. doi: 10.13189/eer.2013.010302.

7. Sheik Md. Kazi Nazrul Islam, Ahmed Sharif and T. Alam, “Interfacial Microstructure, Microhardness and Tensile Properties of Al Micro-Particle Doped Sn-9Zn Eutectic Pb-Free Solder Alloy for Microelectronics Applications” Journal of Telecommunication, Electronic and Computer Engineering (JTEC), Vol.4 No.2, pp. 35-40, July-December 2012, Malaysia.

6. Sheik Md. Kazi Nazrul Islam, ASW Kurny and Fahmida Gulshan, “Photocatalytic Degradation of Methylene Blue by H2O2and Oxalic Acid in Presence of Mill Scale” Proceedings of the WasteSafe 2013 – 3rd  International Conference on Solid Waste Management in the Developing Countries, ISBN: 978-984-33-7045-7, PI.117 (1-8), February10-12, 2013, Bangladesh. 

5. Taslim Ahmed, Sheik Md. Kazi Nazrul Islam, Imran Chowdhury, and Shuza Binzaid “Sustainable Powered Microcontroller-Based Intelligent Security System for Local and Remote Area Applications” published in IEEE/OSA/IAPR International Conference on Informatics, Electronics and Vision (ICIEV12), pp. 276-280, May 18-19, 2012,( ISSN: 2226-2105), Dhaka, Bangladesh @IEEE Xplore. 

4. Imran Chowdhury, Rumana Amin, Sheik Md. Kazi Nazrul Islam, Md. Shoaibur Rahman and Shuza BinzaidMixed-Signal VLSI Design in 0.5μm Process of Nano-Power Subcompact Mirror-Amplifier for AccuSensor published in IEEE International Conference on Computational Intelligence and Communication Networks (CICN 2011), pp. 522 – 526, Oct. 2011, (ISBN: 978-0-7695-4587-5), Gwalior, India. (http://doi.ieeecomputersociety.org/10.1109/CICN.2011.112)

3. Shuza Binzaid, Imran Chowdhury, Md. Shoaibur Rahman and Sheik Md. Kazi Nazrul IslamNano-Power VLSI Design for Precision Sensor Applications published in IEEE International Conference on Computational Intelligence and Communication Networks (CICN 2011), pp. 554 – 558, Oct. 2011, (ISBN: 978-0-7695-4587-5), Gwalior, India. (http://doi.ieeecomputersociety.org/10.1109/CICN.2011.119)

2. M. A. Hossain, S. M. K. N. Islam, Md. M. Billah, T. Alam, A. SharifEffect of Carbon Nanotubes on the Microhardness of Lead-Free Solders for Nano-Electronics  Applicationpublished in Proceedings of the International Conference on Mechanical Engineering 2011 (ICME2011), 18-20 December 2011, Dhaka, Bangladesh. Paper ID: ICME 11-RT-034.

1. Md. M. Billah, T. Alam, M. A. Hossain, A. Sharif, S. M. K. N. Islam Effect of Al Addition on the Thermal and Mechanical behaviour of Sn-9Zn Eutectic Pb-Free Solder Alloypublished in Proceedings of the International Conference on Mechanical Engineering 2011 (ICME2011), 18-20 December 2011, Dhaka, Bangladesh. Paper ID: ICME 11-AM-016.

Research Project Supervision

  1. Imran Chowdhury, Rumana Amin, S. M. Mahidul Islam, “Mixed-Signal VLSI Design of a Nano-Power Ultra-Precision Mirror Amplifier in 0.5μm Process for Sensor Applications” , UITS BSc Project
  2. Taslim Ahmed, Samar Chowdhury, Khokan Das, “Design and Control of an LED-based Intelligent Lamp using Microcontroller”, UITS BSc Project
  3. Md. Tanim Hossain, Md. Rubel Ahmed, “Reliability of Main Transformer”, UITS BSc Project
  4. Md. Ratul Hasan, Md. Murad Hossain, Md. Hejbul Tawhid, “Microcontroller based Solar Tracking System”, UITS BSc Project
  5. Imran-UL-Hasan, Md. Shahedul Alam, “IR Remote control Switch Board”, UITS BSc Project
  6. Md. Rokonuzzaman, Md.Shamimul Islam, S.M Raianur Rahman, Md. Arifuzzaman, “Design and Implementation of a Power Generation system using Speed Breaker”, UITS BSc Project
  7. Foyazur Rahman, Mohammed Rejwane – UI- Haque, Md. Hasanuzzaman, “GSM Core Network Management”, UITS BSc Project
  8. Syed Hiron Hossen, Md. Tariqul Islam, “Thermal Infrared on Load Testing”, UITS BSc Project
  9. Md. Sirajul Islam, Md. Shojib Hossain, Md. Abu Sayed Alam, Md. Shamim Miah, “GSM Based Vehicle Tracking System”, UITS BSc Project
  10. Mohammed Moin Uddin, “Design and Implementation of a AC load Control and Faulty Product Detection”, UITS BSc Project
  11. Joy Bala, Md. Aman Ullah, Abu Haydar, Mohammed Shafiquzzaman, “GSM Based Power Control  and Monitoring using Microcontroller”, UITS BSc Project
  12. Tipu Dhar, Amit Barua, Nahid Hasan, “Multi Tariff Billing System”, UITS BSc Project
  13. Mithun Malakar, Mohammed Mohsin Uddin, Mohammed Jonayet Hossain, Mohammed Tarekul Islam, “Automatic Plant Irrigation System”, UITS BSc Project
  14. Md. Abdul Baten, Faisal Ahmed, Md. Ariful Islam, Md. Mehedi Hasan, “Automatic Power Supply Control From Different Sources (PDB, IPS, GEN) With Ultra-Fast Circuit Breaker”, UITS BSc Project
  15. Md. Shafaur Rahman, S. M. Anowerul Islam, “Gas Generator operation and maintenance”, UITS BSc Project
  16. Jinat Ali, Sanjoy Kumar Mostabi, Shohag Raj Shumon, “A Rechargeable/Top-Up GSM based Smart Prepaid Electricity System”, UITS BSc Project
  17. Md. Rahemul Haque, Md. Jane Alam, Md. Ansari Haque, Md. Jobayed Hossain Rasel, “Internship on Power Generation in Seema Spinning Mills Ltd.” , UITS BSc Project
  18. Md. Zahidul Islam, Md. Mamun-ur-Rashid, Md. Raqibul Islam, Md. Rashedul Islam, “Design and Implementation of Security Alarm System”, UITS BSc Project
  19. Md. Shamim Uddin , “Observation of ATS, Solar, and Star -  Delta Starter Panel”, UITS BSc Project
  20. Md. Saiful Azam, Md. Maskatul Arfin, Mithun Das Gupta, Md. Mohibul Islam, “Digital Door Lock System using Stepper Motor”, UITS BSc Project
  21. Md. Fakhrul Islam, Md. Nuruzzaman, Abdullah Al Mamun, Aminur Rahman, “Three Axis Accelerator Based on Earthquake Detector”, UITS BSc Project
  22. Sahedur Rahman Khan, Md. Azim, “GPRS Based Home Automation System”, UITS BSc Project
Research Areas
  1. Semiconductor Nanofabrication
  2. VLSI 
  3. Integrated Electronics
  4. Analysis and Characterization of Nanoscale Materials
  5. Electronic Packaging Materials
  6. Photocatalytic Properties of Materials

Research Projects:  

  • Project Title: Treatment of Textile Effluent: A Study on the Effectiveness of Mill scale on the Decomposition of Dye Ingredients.

          This work is financed by Ministry of Science and Technology, People’s Republic of Bangladesh.    

              Duration: July 2011- February 2013

  • Project Title: Effectiveness of Micro and Nano Composites Lead Free Solder Alloys for Electronics Application.

   This research acknowledge a project of A*Star Science and Engineering Research Council (SERC Grant No. 1021650082), Singapore through the innovation consortium ‘‘Ruggedized Electronics’’ program.

              Duration: January 2010-May 2011

Courses
  • Electronics 1, Electronics 1 Lab
  • Electronics 2, Electronics 2 Lab
  • Semiconductor Theory & Devices, 
  • Industrial & Power Electronics, Industrial & Power Electronics Lab, 
  • Electrical Engineering Materials, 
  • Electrical Circuit II, Electrical Circuit Lab
  • VLSI Design, VLSI Design Lab 
  • Analog Integrated Circuit
Extra Curicular Activites
  • Member: Research and Project evaluation Committee
  • Organising Secretary, ElectroFest 2012, A Technological Festival organised by EEE & ECE Department, University of Information Technology and Sciences (UITS), Dhaka, Bangladesh.
  • Assisted in organization of International Conferences on Structural, Processing and Properties of Materials (SPPM 2010) in BUET, Dhaka, Bangladesh.
Other Information

http://www.linkedin.com/in/smknislam

http://scholar.google.com/citations?user=4qm5lvEAAAAJ&hl=en&oi=ao

Go Back | Print